The Tour AD M9003 was designed and is manufactured at the Graphite Design Japan factory headquarters and is offered in 68g S and X flex and 78g S and X flex. The Tour AD M9003 series exemplifies the ultimate in shaft quality. Manufactured with ultra-high modulus, 55t carbon-fiber and the latest in graphite material from Toray Industries, Inc., TORAYCA ® T1100G carbon-fiber pre-preg with NANOALLOY ® technology, the Tour AD M9003 series delivers the superior feel expected of a high-performance graphite golf shaft.
Designed with a medium butt section, a firm center section and a stiff+ tip, the Tour AD M9003 model is designed for the lower handicap and tour level players with higher swing speeds of 105+ mph to promote a low launch condition and low ball spin rates.
Watch the Review of GD Woods
Features & Technology:
- 55 ton ultra-premium, high modulus, aerospace quality carbon fiber materials.
- TORAYCA ® T1100G carbon-fiber pre-preg with NANOALLOY ® technology
- Graphite Design proprietary Material Stiffness Integration (MSI) design philosophy and technology.
Bend Profile:
| BUTT Section | MID Section | TIP Section |
|---|---|---|
| MEDIUM | FIRM | STIFF+ |
Performance:
- Designed to promote Low to Mid launch angles with Low ball spin rates.
- MSRP $550
Fitting:
| 96-105 MPH | 105+ MPH |
|---|---|
| S Flex (Stiff) |
X Flex (X-Stiff) |
Tip Trimming for Std Bore:
| Driver | 3 Wood | 5 Wood |
|---|---|---|
| 0″ | 0.5″ | 0.5″ |
- Pro’s Choice encourages consulting a PGA Professional or qualified club builder to help you determine the correct shaft and length for your swing profile and to meet your goals.
- Always leave a minimum of 0.5″ of the parallel tip section of the shaft above the hosel to maintain shaft durability and prevent shaft failure/breakage. For example, if the head has a hosel bore depth of 1.5″ and the shaft has a parallel tip length of 3.0″, the tip trim length should not exceed 1.0″.
- Improper installation may affect the intended performance of the shaft. Warranty is for material and workmanship of our products. Improper installation voids warranty of product.
Specifications:
| Shaft Type | Part Number | Flex | Length | Wt. | Tip OD | Tip Para. | Butt OD | Torque | Kick pt | Launch | Spin |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TOUR AD M9003 6 S | ADM9003-6S | Stiff | 46″ | 68g | .335″ | 3.0″ | .602″ | 3.1 | HIGH | LOW | LOW |
| TOUR AD M9003 6 X | ADM9003-6X | X-Stiff | 46″ | 69g | .335″ | 3.0″ | .604″ | 3.1 | HIGH | LOW | LOW |
| TOUR AD M9003 7 S | ADM9003-7S | Stiff | 46″ | 76g | .335″ | 3.0″ | .600″ | 2.4 | HIGH | LOW | LOW |
| TOUR AD M9003 7 X | ADM9003-7X | X-Stiff | 46″ | 78g | .335″ | 3.0″ | .604″ | 2.4 | HIGH | LOW | LOW |
Where to Buy (Click here or on map to view store locations)
Click on the map to find a location near you