
Designed to meet the needs of club builders and hobbyist alike, the combination flexes of the G-Tech Wood and Iron shafts in A/L flex with a white and gold graphic and R/S flex with a black and gold graphic provides a wide array of options. The G-Tech Wood shafts are 47″ long with a 5.0″ tip parallel section and .335″ tip diameter to provide plenty of room for tip trimming and shaft flex tuning. The G-Tech Iron shafts are 41″ long with a 6″ tip parallel tip section and .370″ tip diameter. The G-Tech line compliments the quality and performance reputation that Graphite Design is so well know for.
Features & Technology:
- Standard and Intermediate modulus materials.
- Great all around shaft for players looking to upgrade to graphite shafts at an economical price.
Bend Profile:
Shaft |
BUTT Section |
MID Section |
TIP Section |
G-Tech A/L |
MEDIUM |
MEDIUM/SOFT |
SOFT |
G-Tech R/S |
FIRM |
MEDIUM |
MEDIUM |
Performance:
- Designed to allow the club builder additional flexibility for tip trimming options to promote optimal launch angles and ball spin rates.
Fitting:
Less than 70 MPH |
71-85 MPH |
86-95 MPH |
96-105 MPH |
L Flex
(Ladies) |
A Flex
(Lite/Senior) |
R Flex
(Regular) |
S Flex
(Stiff) |
Tip Trimming for Std Bore:
Shaft |
Driver |
3 Wood |
5 Wood |
7-9 Wood |
G-Tech Wood L or R |
0″ |
0.5″ |
1.0″ |
1.5″ |
G-Tech Wood A or S |
2.0″ |
2.5″ |
3.0″ |
3.5″ |
G Tech Hybrid Tipping Instructions Using Iron Blank |
15-18° |
19-22° |
23°+ |
Tip Trimming – L or R Flex |
0.5″ |
1.0″ |
1.5″ |
Tip Trimming – A or S Flex |
1.0″ |
1.5″ |
2.0″ |
Shaft |
#3 Iron |
#4 Iron |
#5 Iron |
#6 Iron |
#7 Iron |
#8 Iron |
#9 Iron |
Wedge |
G-Tech Iron L or R |
0″ |
0.5″ |
1.0″ |
1.5″ |
2.0″ |
2.5″ |
3.0″ |
3.0″ |
G-Tech Iron A or S |
1.5″ |
2.0″ |
2.5″ |
3.0″ |
3.5″ |
4.0″ |
4.5″ |
4.5″ |
- Pro’s Choice encourages consulting a PGA Professional or qualified club builder to help you determine the correct shaft and length for your swing profile and to meet your goals.
- Always leave a minimum of 0.5″ of the parallel tip section of the shaft above the hosel to maintain shaft durability and prevent shaft failure/breakage. For example, if the head has a hosel bore depth of 1.5″ and the shaft has a parallel tip length of 3.0″, the tip trim length should not exceed 1.0″.
- Improper installation may effect the intended performance of the shaft. Warranty is for material and workmanship of our products. Improper installation voids warranty of product.
Specifications:
Shaft Type |
Part Number |
Flex |
Length |
Wt. |
Tip OD |
Tip Para. |
Butt OD |
Torque |
Kick pt |
Launch |
Spin |
G-Tech Wood L/A |
GTECH2DR-L/A |
Combo Ladies/ Lite |
47″ |
68g |
.335″ |
5.0″ |
.590″ |
5.0 |
LOW |
HIGH |
MID |
G-Tech Wood R/S |
GTECH2DR-R/S |
Combo Regular/ Stiff |
47″ |
72g |
.335″ |
5.0″ |
.605″ |
5.0 |
MID |
MID |
MID |
G-Tech Iron L/A |
GTECH2IR-L/A |
Combo Ladies/ Lite |
41″ |
75g |
.370″ |
6.0″ |
.590″ |
3.5 |
LOW |
HIGH |
MID |
G-Tech Iron R/S |
GTECH2IR-R/S |
Combo Regular/ Stiff |
41″ |
80g |
.370″ |
6.0″ |
.600″ |
3.5 |
MID |
MID |
MID |

Click on the map to find a location near you