Tour AD F-Series Shafts

 

Designed and manufactured at the Graphite Design Japan factory headquarters, the Tour AD F-Series Fairway shafts are available in 55g R2, R1 and S Flex, 65g SR (Stiff Regular), S and X flex, 75g S and X flex and 85g S and X flex.

The Tour AD F-Series Fairway shafts are designed with a softer tip and stiffer butt profile and feature a Low Kick Point for higher launch conditions into the air and mid-ball spin. Manufactured under the same tight tolerances and with premium, aerospace quality 40t carbon-fiber materials, the Tour AD F-Series of shafts fall directly in line with all of the other high quality Graphite Design shafts as a complementing Fairway wood shaft.

Should you be searching for a new Fairway shaft that is designed to provide maximum distance and extra forgiveness off the fairways, then a new Tour AD F-Series Fairway graphite shaft may be the answer to what you are looking for in a high performance golf shaft for your Fairway metal-woods.

MSI_side_image

Features & Technology:

  • 40t High modulus, premium aerospace quality carbon fiber materials.
  • Graphite Design proprietary Material Stiffness Integration (MSI) design philosophy and technology.

Bend Profile:

BUTT Section MID Section TIP Section
FIRM MEDIUM SOFT

Performance:

  • Designed to promote High launch angles with Mid ball spin rates.
  • MSRP $300

Fitting: (Based on Driver Swing Speed)

71-85 MPH 86-95 MPH 92-98 MPH 96-105 MPH 105+ MPH
 R2 Flex
(Lite/Senior)
 R1 Flex
(Regular)
 SR Flex
(Stiff Regular)
S Flex
(Stiff)
 X Flex
(X-Stiff)

Tip Trimming for Standard Bore:

3 Wood 5 Wood 7 Wood 9 Wood
0.5″ 1″ 1″ 1″
  • Pro’s Choice encourages consulting a PGA Professional or qualified club builder to help you determine the correct shaft and length for your swing profile and to meet your goals.
  • Always leave a minimum of 0.5″ of the parallel tip section of the shaft above the hosel to maintain shaft durability and prevent shaft failure/breakage.  For example, if the head has a hosel bore depth of 1.5″ and the shaft has a parallel tip length of 3.0″, the tip trim length should not exceed 1.0″.
  • Improper installation may affect the intended performance of the shaft. Warranty is for material and workmanship of our products. Improper installation voids warranty of product.

Specifications:

Shaft Type Part Number Flex Length Wt. Tip OD Tip Para. Butt OD Torque Kick pt Launch Spin
Tour AD F-55 R2 ADFW5-R2 Lite/Senior 44″ 59g .335″ 3.0″ .598″ 5.0 LOW HIGH MID
Tour AD F-55 R1 ADFW5-R1 Regular 44″ 60g .335″ 3.0″ .598″ 5.0 LOW HIGH MID
Tour AD F-55 S ADFW5-S Stiff 44″ 60g .335″ 3.0″ .602″ 5.0 LOW HIGH MID
Tour AD F-65 SR ADFW6-SR Stiff Regular 44″ 68g .335″ 3.0″ .604″ 3.3 LOW HIGH MID
Tour AD F-65 S ADFW6-S Stiff 44″ 68g .335″ 3.0″ .604″ 3.3 LOW HIGH MID
Tour AD F-65 X ADFW6-X X-Stiff 44″ 70g .335″ 3.0″ .604″ 3.3 LOW HIGH MID
Tour AD F-75 S ADFW7-S Stiff 44″ 77g .335″ 3.0″ .598″ 3.2 LOW HIGH MID
Tour AD F-75 X ADFW7-X X-Stiff 44″ 79g .335″ 3.0″ .602″ 3.2 LOW HIGH MID
Tour AD F-85 S ADFW8-S Stiff 44″ 89g .335″ 3.0″ .602″ 2.8 LOW HIGH MID
Tour AD F-85 X ADFW8-X X-Stiff 44″ 91g .335″ 3.0″ .604″ 2.8 LOW HIGH MID

Where to Buy (Click here or on map to view store locations)

Click on the map to find a location near you